Service Currently Not Available (SCNA) - Ultra Box / Ulti Box

If an error message on your TV has one of the following keywords:
- Switch to Continuous Viewing
- Service Currently Not Available (SCNA)
- (Code: SCNA)

You can proceed with the troubleshooting steps below if the weather is good. Otherwise, you may try again later.

‍

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press OK.

STEP 4

Navigate to Diagnostics and press OK.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.